CYP IP-7000TXWP, Operation Manual, Page: 35 / 52

30
COMMAND
Description and Parameters
set_vw_layout N1 N2 {N3}

Set the video wall total horizontal and vertical display count for the
specified receiver.
N1 = 1~16 [Horizontal display count]
N2 = 1~16 [Vertical display count]
N3 = 0~255 [Target receiver ID {Optional}]
Note: The target receiver ID number can be obtained by turning on the
Video Wall OSD. Omitting N3 makes the settings global to all Receivers.
set_vw_pos N1 N2 {N3}

Set the display’s position within the video wall. (Cannot exceed the
video wall’s horizontal and vertical display count.)
N1
= 0~15 [Row]
N2
= 0~15 [Column]
N3
= 0~255 [Target receiver ID {Optional}]
Note: The target receiver ID number can be obtained by turning on the
Video Wall OSD. Omitting
N3
makes the settings global to all receivers.
set_vw_bc N1 N2 N3 N4 {N5}

Set the video wall display bezel compensation values for the speci-
fied receiver.
N1
= 0~99999 [Video width]
N2
= 0~99999 [Total display width]
N3
= 0~99999 [Video height]
N4
= 0~99999 [Total display height]
N5
= 0~255 [Target receiver ID {Optional}]
Note: The target receiver ID number can be obtained by turning on the
Video Wall OSD. Omitting
N5
makes the settings global to all receivers.