CYP IP-7000TXWP, Operation Manual, Page: 29 / 52

24
6.6 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
Start your preferred Telnet/Console client, or use the built in client
provided by most modern computer operating systems. After starting
the client, connect by using the current IP address of the unit and port
23 (if the communication port number used by the unit has not been
changed previously). This will connect us to the unit we wish to control
and commands may now be entered directly.
Note 1: If the IP address of the unit is changed then the IP address required for
Telnet access will also change accordingly.
Note 2: By default the unit is set to “Auto IP” mode. The current IP address can
be obtained by using the Device Discovery Tool, or by checking the OSD info
screen when there is no live video connection. The default communication
port is 23.
6.7 Telnet Commands
COMMAND
Description and Parameters
help

Show the full command list.
help N1

Show help details about the specified command.
N1
= {Command name}
get_hardware_version

Show the unit’s current hardware version.
get_firmware_version

Show the unit’s current firmware version.