CYP IP-7000TXWP, Operation Manual, Page: 10 / 52

5
5 POWER LED: This LED will flash while the unit is powering on and will
illuminate solidly once it is ready to be used.
6 HDMI IN Port:
Connect to HDMI source equipment such as a media
player, game console or set-top box.
7 IR IN Port: Connect to the provided IR Extender to extend the IR
control range of remotely located devices. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
Note: When the transmitter is in multicast mode the IR signal is sent to all
associated receivers.
8
IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
sent from the associated receiver to devices within direct line-of-sight
of the remote IR Blaster.
9 LINE IN Port:
Connect to the stereo analogue output of a device such
as a CD player or PC.
Note: By default, the analogue Line In is automatically embedded with
the VGA input in the streaming output.
10 LINE OUT Port:
Connect to powered speakers or an amplifier for
stereo analogue audio output. This will output the audio from the Mic
In on the connected receiver.
Note: This function is only available in unicast mode. The Mic In audio
channel from the receiver is only active when an analogue source is also
connected to the Line In port on the transmitter.
11 VGA IN Port:
Connect to VGA source equipment such as a PC or
laptop.