CYP IP-7000TXWP, Operation Manual, Page: 36 / 52

31
COMMAND
Description and Parameters
set_vw_hscale N1 {N2}

Set the video wall display horizontal zoom amount for the specified
receiver.
N1 = 0~99999 [Zoom amount in 1 pixel units]
N2 = 0~255 [Target receiver ID {Optional}]
Note: The target receiver ID number can be obtained by turning on the
Video Wall OSD. Omitting N2 makes the setting global to all receivers.
set_vw_vscale N1 {N2}

Set the video wall display vertical zoom amount for the specified
receiver.
N1 = 0~99999 [Zoom amount in 1 pixel units]
N2 = 0~255 [Target receiver ID {Optional}]
Note: The target receiver ID number can be obtained by turning on the
Video Wall OSD. Omitting N2 makes the setting global to all receivers.
set_vw_shift N1 N2 {N3}

Set the video wall display output shift for the specified receiver.
Available values for
N1 :
U [Shift up]
D [Shift down]
L [Shift left]
R [Shift right]
N2 = 0~80000 [Pixel shift amount in increments of
8.]
N3 = 0~255 [Target receiver ID {Optional}]
Note: The target receiver ID number can be obtained by turning on the
Video Wall OSD. Omitting N3 makes the setting global to all receivers.