CYP IP-7000TXWP, Operation Manual, Page: 22 / 52

17
3) Preferences:
This section of the Video Wall tab provides additional
controls over how the source video is displayed on the video wall as
well as providing a drop down to determine which receiver to apply
changed settings to and an option to show the OSD.
„
Stretch Type: Set the video stretch method.
- Selecting “Fit In” will expand the video to exactly fit the
dimensions of the video wall regardless of the source’s original
aspect ratio.
- Selecting “Stretch Out” will zoom the video until the video wall is
filled in all 4 dimensions while maintaining the aspect ratio of the
original source.
„
Clockwise Rotate: Set the rotation of the video output to 0, 180 or
270 degrees.
„
Apply To:
Select which unit(s) to send updated settings to when
“Apply” is pressed.
- Selecting an IP address from the “Clients” list will direct updates
to the video wall settings of the receiver with that IP address.
„
Show OSD:
Enables or disables the OSD display of each receivers’
ID within the Video Wall group.
Note: When setting up a new video wall, or changing the configuration
of an existing one, remember to update the configuration of each
receiver in the system.