CYP CPLUS-V2PEL, Operation Manual

Page: 23 / 38

18
COMMAND
Description and Parameters
GET IN 1 HACTIVE

Show the current number of horizontal active pixels from the
source on the Input.
GET IN 1 VACTIVE

Show the current number of vertical active pixels from the source
on the Input.
GET IN 1 REFRESH RATE

Show the current refresh rate of the source on the Input.
GET IN 1 INTERLACE

Show the current interlace state of the source on the Input.
GET IN 1 SYNC STATUS

Show the current sync status of the source on the Input.
SET IN 1 EDID N1

Set the EDID to use with the Input.
Available values for
N1 :
1 [FHD 2CH]
2 [FHD MCH]
3 [UHD 2CH]
4 [UHD MCH]
5 [UHD+ 2CH]
6 [UHD+ MCH]
7 [User 1]
8 [Sink A]
9 [Sink B]
GET IN 1 EDID

Show the currently selected EDID used by the Input.
GET EDID LIST

List all available EDID selections.