13
1) Mode:
Enable or disable the test pattern function on Output A.
■
Auto Pattern:
Will make the test patterns automatically change
based on the “Switch Time” setting.
■
Auto Timing:
Will show the selected test pattern and make the
output resolution automatically change based on the “Switch
Time” setting and the resolutions enabled under “Auto Timing
Select”.
2) Pattern:
Selects the test pattern to output.
3) Resolution:
Selects the output resolution to use.
4) HDCP:
Enable or disable HDCP while outputting the test pattern.
5) Switch Time:
Select the length of time between pattern or
resolution changes in the “Auto Pattern” and “Auto Timing”
modes.
6) Auto Timing Select:
Select the resolutions to rotate through when
the “Auto Timing” mode has been enabled.
INFORMATION
2nd Level
3rd Level
Timing
Input
[Current Status Details]
Output A
Output B
HDCP
Output A
[Current Status Details]
Output B
Firmware Version
[Current Firmware Version]
1) INFORMATION:
This screen displays information about the unit’s
current state, input and output status, as well as the current
firmware version.
Summary of Contents for CPLUS-V2PEL
Page 2: ......