CYP CDPS-U42HPIP, Operation Manuals

Page: 40 / 48

35
6.7.7 System Settings
This tab provides system information, power control, Ethernet
configuration options, system configuration backup/restore/reset, and
firmware update functions.
(1) Power
Press this switch to toggle the unit’s power between ON and OFF
(standby mode).
!
Note: While in standby mode the unit’s WebGUI, Telnet and RS-232
controls are still active.
(2) Lock
Press this switch to enable or disable the front panel button lock
function. When enabled, pressing the physical buttons on the front of
the unit will have no effect.
(3) Network
IP mode may be switched between Static IP or DHCP. In Static IP
mode the IP, netmask and gateway addresses may be manually set.
When in DHCP mode, the unit will attempt to connect to a local DHCP
server and obtain IP, netmask and gateway addresses automatically.
Please press “Save” after making any changes to the IP configuration
or mode.
!
Note: The unit’s default IP address is 192.168.1.50. If the IP address