CYP CDPS-U42HPIP, Operation Manuals

Page: 22 / 48

17
6.6.6 Audio
COMMAND
DESCRIPTION VARIABLES
SET AUDIO OUT A VOLUME N1

Set or adjust the analog audio
output volume. Available values for N1 :
0~100 [Set volume in dB units]
UP [Raise volume by 1]
DOWN [Lower volume by 1]
GET AUDIO OUT A VOLUME

Show the current analog audio
volume value.
SET AUDIO OUT A DELAY N1

Set the analog audio delay value
(in milliseconds). N1 = 13~100 [Audio delay in ms]
!
Note: The range provided is for 48KHz sources. Increasing the sample
rate will reduce the maximum delay range.
GET AUDIO OUT A DELAY

Show the current analog audio
delay value.
6.6.7 EDID Management
COMMAND
DESCRIPTION VARIABLES
SET IN N1 EDID N2

Set the EDID to use on Input N1 . N1 = 1~4 [Input number]
Available values for N2 :
1 [FHD/2CH]
2 [FHD/MCH]
3 [UHD/2CH]
4 [UHD/MCH]
5 [UHD+/2CH]
6 [UHD+/MCH]
7~10
[User EDID 1~4]
11 [Sink A]
12 [Sink B]