CYP CDPS-U42HPIP, Operation Manuals

Page: 31 / 48

26
(1) Matrix Mode
This mode provides a way to switch between the 4 available inputs
with full screen output. To select a new input, click on the dropdown
next to either Output A or Output B and select the new Input to route
to that output. The switch will occur immediately.
!
Note: Selecting a new input overrides the audio source selection
from the Audio tab and audio output will be from the most
recently selected input.
The behavior of this mode is different depending on the resolution of
the inputs and the selected output resolution.
A
All Inputs and Outputs are below 4K: Switching is seamless and
each output can display an independently selected source.
B
Any Input or Output is 4K: Switching is seamless, but black will be
briefly shown between switches. Both outputs will always display
the same source.
(2) Multiview Mode
Multiview Mode provides a selection of 4 different multi-window
display options: Quad View, 3+1 View, Side by Side, and Picture in
Picture. In Multiview Mode, both outputs are always mirrored and
display the same image.
!
Note: When the output resolution is set to 4K@50/60Hz, only Quad
View is available.