CynkoMet N-221/3-3, Instructions For Use And Operation

Page: 71 / 119

Cynko Met N-221/3-3
N-221/4-3
71
spreader driving
speed
the vehicle speed
Improper
operation of
the hydraulic
system
Improper hydraulic
oil viscosity
Check the quality of
oil, make sure that the
oil in both machines is
of the same type. If
necessary, replace the
oil in the tractor and /
or trailer
Insufficient efficiency
of the tractor
hydraulic pump,
damaged tractor
hydraulic pump.
Check the hydraulic
pump on the tractor.
Damaged or
contaminated
actuator
Check the cylinder
piston (bending,
corrosion), check the
cylinder for tightness
(piston rod sealing), if
necessary, repair or
replace the actuator.
Too much actuator
load
Check and, if
necessary, reduce the
load on the actuator
Damaged hoses
Check to make sure
that the hydraulic
hoses are tight, not
refracted and properly
looped. If necessary,
replace or tighten.