CynkoMet N-221/3-3, Instructions For Use And Operation

Page: 13 / 119

Cynko Met N-221/3-3
N-221/4-3
13

It is forbidden to enter into the loading platform during operation and when
coupling the tractor with the spreader.

The machine is designed to work on slopes up to 8 °.

Disconnecting the spreader from the tractor is not allowed with the engine
running and key not removed.

Modifications can be made only with the permission of the manufacturer. The
basic condition for safety are original spare parts and components. Using
other parts may result in exclusion of liability of the manufacturer for resulting
consequences.

Careless operation and use of the spreader can injure the operator or third
parties and damage the tractor-spreader set.

It is forbidden to use the machine by persons not qualified to drive
agricultural tractors, including under aged persons and persons under the
influence of alcohol.

It is forbidden to use the spreader in non-compliance to its purposes. The staff
operating the machine should strictly observe basic safety rules

Prior to each spreader's use, check its technical condition, especially the condition of
the coupling system, drive system, brakes and signaling lights.

The machine is marked with information and warning inscriptions in the form of
stickers as specified in Table 1. The user is obliged to constantly take care of the
readability of signs and warning symbols on the machine. In the event of damage or
destruction replace them with new ones.

Labels with inscriptions and symbols are available from the manufacturer.
3.2 Attaching and detaching the machine to the tractor

Before attaching the spreader, make sure that the tractor and spreader are
technically efficient.

When connecting the spreader, use only the intended trailer hitch in
accordance with the instruction manual of the tractor. After completion of the
machine coupling, check the security of the hitch. Read the whole manual for
the tractor's use If the tractor is equipped with an automatic hitch, make sure
the coupling operation has been completed correctly.