CynkoMet N-221/3-3, Instructions For Use And Operation

Page: 11 / 119

Cynko Met N-221/3-3
N-221/4-3
11

Are familiar with ALL THE CONTENT of the spreader's manual,

have the required authorization to drive and are familiar with the road traffic
regulations and transport regulations.
CAUTION!
CAUTION!
The operation and exploitation of the machine not in
accordance with the Instruction Manual releases the
Manufacturer from liability for the consequences resulting from
non-compliance with the provisions contained therein. At the
same time, it causes a loss of warranty.
CAUTION!
CAUTION!
The manufacturer is not responsible for changes made by the
user in the design of the spreader, and such changes will void
the warranty.
3. Safety in use
3.1 General safety and accident prevention regulations

Before using the spreader, you should carefully read the contents of the
manual. During operation, observe all instructions contained in the manual.

Before each use, check the spreader for operational safety (completeness of
all screens, tightness of all the screws (table..) if there are no cracks on the
structure or visible damage, state of the tension of the chain "if it is not too
loose")

Entering the spreader is possible only during absolute motionlessness of the
machine and disconnection of the Power take-off from the tractor.

The spreader should be combined with tractors recommended by the
manufacturer accordingly to table 2.

Pay attention to the warnings in places of crushing and shearing when
starting the machine and all the pictograms placed on the spreader.