CynkoMet N-221/3-3, Instructions For Use And Operation

Page: 60 / 119

Cynko Met N-221/3-3
N-221/4-3
60
6.2 Brake adjustment.
Brakes regulation should be carried out if:
•
brakes of both wheels brake unevenly and / or non-simultaneously.
•
expander levers are not parallel to each other during braking.
•
a repair of the brake system was carried out.
Fig. 11. Brakes regulation
1 – expander arm, 2 – expander roller, 3 - retaining ring (Seger), 4 - hand brake
cable, 5 – brake cylinder
With properly adjusted brakes, complete braking of both wheels should
take place at the same time.
Brakes adjustment involves changing the position of expander arm 1
(fig. 11) with respect to the expander roller 2. To do this, remove the retaining
ring 3 of roller 2, and then remove arm 1 of shaft 2. Then move the expander
arm on the conjunction with the roller by one or more teeth in the right
direction, namely:
 back - if the brake is too late;
3
2
1
4
5