CynkoMet N-221/3-3, Instructions For Use And Operation

Page: 51 / 119

Cynko Met N-221/3-3
N-221/4-3
51
Source: "The technology of machine works in agriculture", PWN, Warsaw
1985
* - the loading height no higher than 5 cm above the height of the walls
* - Material is to be charged according to the table of the goods mass
CAUTION!
CAUTION!
It is advised to aim at an even distribution of the load in the
loading crate.
CAUTION!
CAUTION!
It is prohibited to exceed the admissible spreader load,
because it threatens the safety of road traffic and might cause
damage to the machine.
CAUTION!
CAUTION!
Overloading the spreader, incompetent loading are the
most common causes of accidents during transport. The
load must be arranged so as not to threaten the stability of
the spreader and not obstruct driving the set.
CAUTION!
CAUTION!
Observe strictly that there are no bystanders in the loading zone
and when turning on the adapter. Before commencing the
loading of the spreader and during its work, ensure that there is
proper visibility and make sure that there are no bystanders
nearby.
The distribution of the load cannot cause an overload of the
chassis, and the spreader’s hitching system.