CynkoMet N-221/3-3, Instructions For Use And Operation, Page: 37 / 119

Cynko Met N-221/3-3
N-221/4-3
37
Figure 10. Adjustable support (from the left: isometry, side projection).
1. Lever for lifting support; 2 - Top wheel position – “drive”; 3 - Bottom
wheel position – "park”;

Pull the wedges from under the wheels of the spreader.
 Release the hand brake in the spreader.

Check that the deflector / guard is in a closed and secured position.

Set the feed speed.

Start the tractor.

Move the whole set by a few meters.

Open the hydraulic wall (check the proper up / down operation), leave
in an open position.

Turn on the drums rotation gradually increasing the speed from min (1)
to max (10)

Switch on the conveyor feed

In the event of bad feed, repeat the steps
1.
3.
2.