Configuring Packet and Service Filtering
54
PR2000 Installation Guide
•
SRC and DST socket number comparison key. Lets you specify
packets by socket number. After typing the operation (=, <. >), you
will be asked to enter the socket number.
Repeat the above for each rule to be defined.
The Flow Prioritization option allows you to enable packet prioritization. You
will be asked to provide the following parameter:
•
Data Flow Prioritization. Select ‘Active’ to enable Flow
Prioritization. When Flow Prioritization is active and Rule Scope
(Rule Configuration) is Permit, the Priority Level will be requested
(see above).
The association of an access list (filter) with an interface is done in the
configuration of the network protocol for that interface.
