Cybex Arc Trainer 610A Service Manual
Service
Page 4-40
10. Attach the left wheel.
A.
Using a 9/16” wrench and a 3/16” Allen wrench, attach the bolt and nut
securing the left transport wheel in position. See Figure 30.
B.
Remove the wooden block from under the unit.
11. Test the unit for proper operation.
A.
Connect the power cord into the power outlet.
B.
Turn the main power switch above the power inlet to the on (I) position.
C.
Operate the unit at all levels to verify proper operation.
Figure 34
NOTE:
Frame only shown for cable routing.
Lower Display
Cable To Lower
Board
Right Contact
Heart Rate
Cable
Left Contact
Heart Rate
Cable
Figure 35
Wire
Holder
Bracket