2.
Delete unwanted channels by pressing Resistance
Up
or
Down
to change the right LED
window to [dEL].
Press
Enter
to delete channel. Repeat process for additional unwanted channels.
3.
Adjust the near/far setting if available channels are not showing.
Press
Setup
key to change the setting from F (Far) to n (Near). Press
Display option
to
re-scan for available channels.
4.
Press
Up
or
Down
to scroll through and verify all TV channels.
If all TV transmitters are stored, and they all correlate the TV number to the correct TV heard, setup
is complete. If not you may need to re-scan or adjust the transmitter codes (see documentation for
your transmitters to perform a code change).
5.
Press
STOP
to exit setup. Transmitter setup complete.
6.
Proceed to Add FM Radio Stations (optional).
Setup TV FM Transmitters
If your TV’s use FM transmitters, follow these instructions to assign a TV channel to each frequency.
1.
Press and the hold the
Display option
and
UP
keys for 3 seconds.
Display will show time setup.
2.
Press
DOWN
to navigate to the A/V setup screen.
3.
Press the
ENTER
key.
4.
Press the
UP
or
DOWN
keys to select FM.
5.
Press the
ENTER
key.
6.
Plug in headphones to listen for channels during setup.
7.
Press
Display option
to seek the next TV FM frequency or
UP
or
DOWN
to tune
manually.
8.
Press Resistance
UP
or
DOWN
keys to add [Add] a channel.
Press
ENTER
to save channel, std (stored) will be displayed.
9.
Repeat steps 3 and 4 to add all TV FM channels.
10.
Press
Stop
to exit setup when all the TV’s FM transmitter frequencies have a TV number.
Transmitter setup complete.
11.
Proceed to Add FM Radio Stations (optional).
Page 31 of 82
Cybex 525AT Arc Trainer Part Number 5525-4 F
