CyberPower Remote Management System
53
A
ppendix 1:
IP Address Settings for CyberPower
Remote Management Card
Overview
All devices on a
computer network need to have an IP address. Each device’s IP address is unique. The
same address cannot be used twice. In order to assign an IP address to the CyberPower Remote
Management Card, you must determine the range of the available IP addresses, and then choose an
unused IP address to assign to the Remote Management Card.
Note: You may need to contact your network administrator to obtain an available IP address.
Procedures to find an IP address:
1. Locate the subnet of the CyberPower Remote Management Card.
One way to determine the range of possible IP addresses is to view the network configuration on a
workstation. Click on [Start] and select [Run]. Type “command” into the open box and click [OK]. At
the command prompt type “
ipconfig /all
” and press [Enter]. The computer will display network
information as listed below:
Ethernet adapter
Connection-specific DNS Suffix
………
: xxxx.com
Description
……………………...
: D-Link DE220 ISA PnP LAN adapter
Physical Address
………………
: 00-80-C8-DA-7A-C0
DHCP Enabled
………………….…
: Yes
Autoconfiguration Enabled
…
: Yes
IP Address
………………….……
: 192.168.20.102
Subnet Mask
…………………...…
: 255.255.255.0
Default Gateway
……………..…
: 192.168.20.1
DHCP Server
…………………...…
: 192.168.20.1
DNS Servers
…………………...…
: 211.20.71.202
168.95.1.1
