CyberPower Remote Management System
20
[Logs->Syslog]
Allow users to set syslog server and send test message.
Item
Definition
Syslog
Enable or disable Syslog function.
Facility Code
Select Syslog facility.
Server IP
The IP address of Syslog server.
Server Port
The UDP port used by the Syslog server.
Send Test
Send test message to Syslog server.
[System->General->Time]
Display the system date and time and allow users to set it manually or by
using the NTP (Network Time Protocol) server.
Item
Definition
Current Settings
Displays the current date and time on the card status and time until the
next Network Time Protocol (NTP) update.
System Time Configuration
Time Zone
Choose the RMCARD time zone in GMT(Greenwich Mean Time).
Using NTP server
Enter the IP address/domain name of NTP servers, and set the
frequency to update the date and time from NTP server. Click "Update
right now" to update immediately.
Manual Setup
Enter the date and time in the designated format.
[System->General->Identification]
Assign the system’s name, contact, and location.
Item
Definition
Name
The name of the equipment.
Location
Where the power equipment is located.
Contact
The person to contact about this equipment.
[System->General->Daylight Saving Time]
Adjust the clock daylight saving time.
Item
Definition
DST Configuration
Disable
Disable DST.
Tradition US DST
Set traditional US DST settings
Start: 2:00, second Sunday in March.
End: 2:00, first Sunday in November.
Manual DST
Manual DST date time rules.
