CyberPower Remote Management System
21
[System->Security->Authentication]
Set for login authentication and software authentication.
Item
Definition
Login Authentication
Local Account
Use local account Administrator or Viewer settings to log in.
RADIUS , Local Account
Use RADIUS configuration settings to log in. If RADIUS authentication
fails then Local Account settings will be used to log in.
RADIUS Only
Use RADIUS configuration settings to log in.
LDAP , Local Account
Use LDAP configuration settings to log in. If LDAP authentication fails
then Local Account settings will be used to log in.
LDAP Only
Use LDAP configuration settings to log in.
Software Authentication
Secret Phrase
The Authentication Phrase used to communicate with PowerPanel
Business Edition Client.
Note: For more information, please refer to Appendix 4.
[System->Security->Local Account]
This page is used to configure the login account.
Information
Description
Administrator
Administrator has full access to read/write configuration settings.
Viewer
Viewer has restricted access to read only.
Admin/Viewer Manager IP
This setting determines what IP address is allowed to access the
device using either Admin or Viewer accounts. If you want to access
RMCARD from any IP address, you can set one of them as 0.0.0.0 or
255.255.255.255.
Note: A range of IP addresses can be allowed by entering the
subnet mask. For example 192.168.20.0/16 means the IP
which has subnet of 192.168.0.0 can be allowed to access.
Change Administrator account:
1. Enter User Name
2. Enter Current Password
3. Set the Manager IP
(optional)
4. Enter New Password
5. Enter Confirm Password
6.
Click “Apply”
Change Viewer account:
1.
Select “Allow Access” to enable the Viewer account
2. Enter the User Name
3. Set the Manager IP
(optional)
