CyberPower Remote Management System
24
Access Type
The allowable action for the NMS through the community and IP address.
•
Read Only: GET command allowed any time; SET command restricted.
•
Write/Read: GET command allowed any time; SET command allowed
anytime unless a user session is active.
•
Forbidden: GET and SET commands are restricted.
[System->Network Service->SNMPv3 Service]
Allow users to use a NMS and configure the
appropriate SNMPv3 settings.
Item
Definition
SNMPv3 Service
Allow Access
Set the SNMPv3 service to either Enable or Disable.
SNMPv3 Access Control
User Name
The name to identify SNMPv3 user. The field must be 1 to 31 characters in
length.
Authentication
Password
The password used to generate the key used for authentication. The field
must be 16 to 31 characters in length.
Privacy Password
The password used to generate the key used for encryption. The field must
be 16 to 31 characters in length.
IP Address
NMS access can be restricted by entering a specific IP address or an IP
network subnet mask. The following subnet mask rules apply:
•
192.168.20.255: Access only by an NMS on the 192.168.20 segment.
•
192.255.255.255: Access only by an NMS on the 192 segment.
•
0.0.0.0 (the default setting) or 255.255.255.255: Access by any NMS
on any segment.
Authentication Type
The hash type for authentication.
Privacy Type
The type of data encryption/decryption.
Note: The privacy protocol cannot be selected if no authentication protocol is selected
[System->Network Service->Web Service]
Select Enable to allow access to the HTTP or HTTPS
Service and configures the TCP/IP port for them.
Item
Definition
Access
Allow Access
Enable the access to HTTP or HTTPS service. The HTTPS supports
encryption algorithm list as follow:
‧
AES (256/128 bits)
‧
Camellia (256/128 bits)
‧
3DES (168 bits)
‧
DES (168 bits)
