CyberPower Remote Management System
47
R
MCARD Firmware Upgrade
By upgrading the firmware, you can obtain both the new features and updates/improvements to
existing functionality. FTP service needs to be Enabled before attempting to execute a Firmware
Upgrade.
You can check the “Firmware version” on the
[System->About]
page on the web user
interface of the RMCARD. There are two files to update in order to upgrade the firmware version.
- A. cpsrm2scfw_XXX.bin
- B. cpsrm2scdata_XXX.bin
Note: To ensure keeping RMCARD firmware up to date, please visit CyberPower website every
3 months to see if there is any updated firmware version available.
Note: Please do not turn the UPS off when processing the Firmware upgrade.
Method 1: Using FTP command
Use the following steps to upgrade the firmware:
1. Download the latest firmware
2. Extract the downloaded files
to “C:\”
3. Open a command prompt window
4. Login to the CyberPower Remote Management Card with FTP command, in the command prompt
type:
(1)
ftp
(2)
ftp > open
(3) To [current IP address of RMCARD] [port]; EX:
To
192.168.22.126 21
(4) Input USER NAME and PASSWORD (same as the administrator account in web user interface,
see page 6 for default factory settings)
5. Upload file A, type:
ftp > bin
ftp > put cpsrm2scfw_XXX.bin
6. Upload is now complete, type:
ftp > quit
7. The system will reboot after you type “
quit
”
8. Login to the FTP again as step 4
9. Upload file B, type:
ftp > bin
ftp > put cpsrm2scdata_XXX.bin
10. Upload is now complete, type:
ftp > quit
11. The system will reboot after y
ou type “
quit
”
