CONTROLLED COPY CREATED: 3/21/2014 4:59:41 PM
26
To replace the Patch:
1.
Turn off the Sensor from the Hub Home Screen and remove Sensor and Patch from body (if
necessary) as described in “Turning Seizure Monitoring Off”.
Caution:
If Sensor was not turned off using the touchscreen button on the Hub Home
Screen, complete steps 1 and 2 in “Turning Seizure Monitoring Off.” Failure to do so will result
in a communication error when the Sensor attempts to connect with the Hub at the beginning
of the next monitoring period.
2.
Complete the steps as described in “Beginning Seizure Monitoring - Sensor and Patch Setup.”
11.
Using the Hub Software
The following sections provide further detail about the Hub software and related System features.
11.1.
Home Screen
Once you complete the Setup Wizard, the software will display the Home screen.
There are six navigation options on the Home screen:
Sensor
Seizure Log
Reports
System Status
Settings
Help
The features and options for each menu item are detailed in subsequent sections of the User Manual.
From any Hubmenu, press the arrow at the upper left corner (
) to return to the previous screen.
Except during initial setup,you can navigate directly to the Home screen at any time by pressing the
physical “Home” buttonon the Hub (see Figure 2).
11.1.1.
How to Lock the Hub
To prevent inadvertent setting changes, the User may wish to lock the Hub software. To do so, pressthe
lock icon (
)in the lower right corner of the Home Screen.
