CONTROLLED COPY CREATED: 3/21/2014 4:59:41 PM
13
7.2.1.
How to Enter Information on the Hub
Use the following methods to enter information as prompted by the Setup Wizard and during normal
use of theHub software.
Option
Description
Pop-up Menu
Tap a setting field to view a pop-up menu of available options.
Tap an option to select it.
Text Field
Tap the empty text field to pull up an on-screen keyboard.
7.2.2.
Starting the Setup Wizard
To start the Setup Wizard, follow the on-screen instructions listed below.
1.
If you have not already accepted the Terms of Service, read the agreement and press the
“Accept” button. You must accept the Terms of Service before using the ProGuardian System.
2.
Press the “Next” button to begin system setup (Settings & Registration).
3.
Select the preferred date and time format by selecting a field and using the Pop-up menu. Press
the “Continue” button after making your selections.
You may select the order in which day, month, and year is displayed and recorded by
the System.
You may choose either 12 or 24 hour clock format.
4.
Enter the correct local date and time. These settings must be accurate so that when seizure
detections are added to the log, the date and time information is correct.
a.
To set the date, tap the current date.
b.
Adjust the date by using the “+” and “-” buttons, or by using the on screen keyboard to
type into the year, month, or day fields.
c.
Press “Ok” when finished.
d.
To set the time, tap the currently displayed time setting.
e.
Adjust the time by using the “+”and “-” buttons, or by using the on screen keyboard to
type into the hour and minute fields. AM and PM can be selectedby tapping the field
(when appropriate based on selected time display format).
f.
Press “Ok” when finished.
g.
Press “Continue” after both the time and date are set.
Note:
To adjust these settings at a later time refer to the “SETTINGS MENU” section.
