Cybernet Elite-4i User Manual Download

Page: 68 / 76

Cybernet Elite-4i User Guide

58 D r i v e r s a n d U t i l i t i e s

SETUP.EXE for

OS:

NT4

I915GRAPHICS.TAR

for

OS:

Linux

5.4 Intel LAN Drivers

The Elite-4i provides a Intel 10/100 Base T fast Ethernet or Intel Giga LAN Ethernet.
The Elite-4i Ethernet drivers CD contains Ethernet drivers for:

•

Windows 2000/XP

•

Windows 98/98SE/ME

•

Windows 95

•

Windows NT4.0

•

Netware

•

DOS

5.5 ALC 655 Audio Setup

The Elite-4i audio drivers CD contains ALC655 audio drivers for:

•

Windows XP/2000/ME/98SE/98

•

Windows 95

•

Windows NT 4.0

5.6 Installation Instructions

To install the INF, Video, Ethernet, and Audio drivers, find the drivers from the
correct directory and execute the relevant setup files. Please refer to the readme.txt
file under each directory for more drivers information.

NOTE

: Recent releases of operating systems always include setup

programs that load automatically and guide you through the installation.

Summary of Contents for Elite-4i













































































Search results

Summary of Contents for Elite-4i

Reviews:

Related manuals for Elite-4i

Brands by name

Popular brands

Cybernet Elite-4i, User Manual

Search results

Summary of Contents for Elite-4i

Reviews:

Related manuals for Elite-4i

Brands by name

Popular brands