manualshive.com logo in svg

Cybernet Elite-4i, User Manual

Share
Download
Cybernet Elite-4i User Manual Download Page 12

Cybernet Elite-4i User Guide

 

2 E l i t e - 4 i   I n t r o d u c t i o n  

1.2 The Power Button 

To press Power Button will turn-on or turn-off the unit, or turn the unit to suspend 
mode. 

1.3 The Indicator Panel 

 

Figure 1  Indicator Panel 

 
There are five LEDs on the Elite-4i indicator panel as follows from left to right: 
 

LED Name 

Color 

Indications 

100Mbps LED 

Green  This LED will light to indicate LINK 

(10/100/1000Mbps) mode. 

10Mbps LED 

Amber  This LED will light to indicate LAN ACTIVE. 

Power / ACPI 
Standby LED 

Blue  This LED will light by turning on the unit. It will 

turn off when the system is shut down or enters 
ACPI standby mode to indicate that DC power 
is not available. 

HDD LED 

Amber  This LED will light to indicate hard drive and 

optical drive activity. 

FDD LED 

Green  This LED will light to indicate floppy drive or 

flash card activity. 

Summary of Contents for Elite-4i













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands