manualshive.com logo in svg

Cybernet Elite-4i, User Manual

Share
Download
Cybernet Elite-4i User Manual Download Page 43

  Cybernet Elite-4i User Guide 

 

C M O S   S e t u p   U t i l i t y  33 

4.2 Control Key Definitions 

Listed below are explanations of the keys displayed at the bottom of the CMOS 
Setup Utility screen: 
 

Up arrow 

Move to previous item 

Down arrow  Move to next item 
Left arrow 

Move to the item on the left 

Right arrow  Move to the item on the right 

ESC key 

Main Menu

 - Quit and not save changes into CMOS 

Status Page

 Setup Menu and 

Option Page

 Setup Menu 

- Exit current page and return to Main Menu 

PgUp key 

Increase the numeric value or make changes 

PgDn key 

Decrease the numeric value or make changes 

F1 key 

General help, only for Status Page Setup Menu and 
Option Page Setup Menu 

F3 key 

Reserved 

F4 key 

Reserved 

F5 key 

Restore the previous CMOS value from CMOS, only for 
Option Page Setup Menu 

F6 key 

Load the Failsafe Defaults, only for Option Page Setup 
Menu 

F7 key 

Load the Optimized Defaults 

F8 key 

Reserved 

F9 key 

Reserved 

F10 key 

Save all the CMOS changes, only for Main Menu 

 

4.3 Main Menu Help 

The on-line description of the highlighted setup function is displayed at the bottom 
of the screen.  Press <F1> to pop up a small help window that describes the 
appropriate keys to use and the possible selections for the highlighted item.  To 
exit the Help Window, press <ESC>. 

Summary of Contents for Elite-4i













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands