Cybernet Elite-4i User Guide
32 C M O S S e t u p U t i l i t y
4.1. Entering Setup
When the system is powered on, the BIOS will enter the Power-On Self Test (POST)
routines. These routines perform various diagnostic checks. If an error is
encountered, the error will be reported in one of two different ways:
•
If the error occurs before the display device is initialized, a series of beeps will
be transmitted.
•
If the error occurs after the display device is initialized, the screen will display
the error message.
After the POST routines are completed, the following message appears:
"Press DEL to enter SETUP"
To access the AWARD BIOS SETUP program, you don’t have to wait for the
POST process. Hold down the <DEL> key immediately to display the "CMOS
SETUP UTILITY" screen, which provides access to the utility's various functions.
Phoenix – AwardBIOS CMOS Setup Utility
> Standard CMOS Features
> Advanced BIOS Features
> Advanced Chipset Features
> Integrated Peripherals
> Power Management Setup
> PnP/PCI Configurations
> PC Health Status
> Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit
áâßà
: Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type..
Figure 33 CMOS Setup Utility – Main Menu Screen
NOTE:
After you have made your selections in the BIOS Features
Setup screen, press <ESC> to go back to the main screen.
