CyberData VoIP Indoor Intercom 011030 Operation Manual Download

Page: 45 / 46

Operations Guide

930260A

CyberData Corporation

resetting the IP address to the default 29, 33
restoring factory default settings 14, 3 5
ringback tone

RJ-45  10
RMA returned materials authorization  33
RTFM jumper  10, 13, 14
RTFM jumper switch  13
RTFM switch  13, 14
RTP/AVP  4

server address, SIP  22
setting up a TFTP server  31
setting up an intercom  6
settings, default  14
SIP (session initiation protocol)  4
SIP Configuration  22, 24
SIP configuration

SIP Server 22

SIP registration 23
SIP server 22

SIP servers supported 4

solarwinds  31
speaker output  4
speaker volume  16
static IP addressing  17
subnet mask  15, 17
supported protocols  4

technical support, contact information 33
TFTP server 4, 31

unregister, from SIP server 23
user ID

for SIP server login 23
SIP 22

username

changing for web configuration access  19
default for web configuration access  15
restoring the default  15

verifying

baud rate  12
intercom operations  19
network activity  12
network connectivity  12

warranty  34
web access password  15
web access username  15
web configuration log in address  15
web-based intercom configuration  15
weight  4
Windows, setting up a TFTP server on  31

yellow act light 12
yellow link light 12

Summary of Contents for VoIP Indoor Intercom 011030















































Search results

Summary of Contents for VoIP Indoor Intercom 011030

Reviews:

Related manuals for VoIP Indoor Intercom 011030

Brands by name

Popular brands

CyberData VoIP Indoor Intercom 011030, Operation Manual

Search results

Summary of Contents for VoIP Indoor Intercom 011030

Reviews:

Related manuals for VoIP Indoor Intercom 011030

Brands by name

Popular brands