Installing the VoIP Indoor Intercom
Configure the Intercom Parameters
Operations Guide
930260A
CyberData Corporation
25
3. After changing the parameters, click
Save Settings
.
Door Open Timeout (in seconds)
Select the number of seconds that you want to pass before
the door sensor is activated.
Door Sensor Normally Closed
Select the inactive state of the door sensors.
Intrusion Sensor
Flash Button LED*
Select
Yes
to flash the LED until the sensor is deactivated
(roughly 10 times/second).
Activate Relay
Select
Yes
to activate the relay until the sensor is
deactivated.
Play Audio Locally
Select
Yes
to loop an audio file out of the Interfom speaker
until the sensor is deactivated.
Play Audio Remotely
Select
Yes
to call a preset extension and play a pre-
recorded audio file (once).
Dial Out Extension
Enter the button dial-out extension number.
Click this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the
Intercom Setup
page.
Link to the
Network Setup
page.
Link to the
Upgrade Firmware
page.
Link to the
Home
page.
Table 2-8. Sensor Setup Parameters
Web Page Item
Description
