CyberData Corporation
930260A
Operations Guide
Installing the VoIP Indoor Intercom
Configure the Intercom Parameters
22
2.3.4 Configure the SIP Parameters
1. Click
SIP Setup
to open the
SIP Setup
page (
).
Note
For specific server configurations, go to the following URL:
http://www.cyberdata.net/support/voip/intercom.html
Figure 2-16. SIP Setup Page
2. On the
SIP Setup
page, enter values for the parameters indicated in
Table 2-7. SIP Setup Parameters
Web Page Item
Description
SIP Server*
Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Outbound Proxy
Enter the Outbound Proxy as either a numeric IP address
in dotted decimal notation or the fully qualified host name
(FQHN) up to 64 characters.
Remote SIP Port*
Enter the
Remote SIP Port
number (default 5060).
Local SIP Port*
Enter the
Local SIP Port
number (default 5060).
SIP User ID*
Enter the
SIP User ID
(up to 25 alphanumeric characters).