CyberData Corporation
930260A
Operations Guide
Installing the VoIP Indoor Intercom
Configure the Intercom Parameters
18
3. After changing the parameters, click
Save Settings
. This updates the changed parameters and
reboots the Intercom if appropriate.
4. Connect the Intercom to the target network.
5. From a system on the same network as the Intercom, open a browser with the new IP address of
the Intercom.
Default Gateway
Enter the Default Gateway address.
DNS Server 1*
Enter the DNS Server 1 address.
DNS Server 2*
Enter the DNS Server 2 address.
Click this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
Link to the
Intercom Setup
page.
Link to the
SIP Setup
page.
Link to the
Upgrade Firmware
page.
Link to the
Home
page.
Table 2-5. Network Setup Parameters
Web Page Item
Description
