įĂĀĂĀƫ5!.ƫ+3!.ƫ5/0!)/ƫĨĩČƫ *ċƫ((ƫ.%#$0/ƫ.!/!.2! ċƫ((ƫ+0$!.ƫ0. !).'/ƫ.!ƫ0$!ƫ,.+,!.05ƫ+"ƫ0$!%.ƫ.!/,!0%2!ƫ+3*!./ċƫ
19
OPTIONAL LCD CONTROL PANEL INSTALLATION
It must be done by qualified personnel.
To avoid electric shock, turn off and unplug the unit before proceeding with REMOTE CONTROL or
WALL-MOUNTING INSTRUCTIONS.
REMOTE CONTROL
Step 1: Remove the Multifunction LCD Control Panel
Unscrew the right panel of the power module. Separate the right panel from the UPS. Gently lift the LCD
module out. Reinstall the right panel.
Step 2: Connect a DB26 Cable
Connect a DB26 cable (not included) from LCD module
to the “Remote Control Port” on the front panel as shown
in the following figure.
WALL-MOUNTING INSTRUCTIONS
Step 1: Remove the Multifunction LCD Control Panel
Unscrew the right panel of the power module. Separate the right panel from the UPS. Gently lift the LCD
module out. Reinstall the right panel.
Step 2: Rotate the DB26 Connector of LCD Control Panel
Step 3: Connect a DB26 Cable
Connect a DB26 cable (not included) from LCD module to the “Remote Control Port” on the front panel as
shown in the following figure.
Step 4: Mount LCD Module on the Wall
1
3
4
Wall mounting hole
10* 5*13.8L
Caution: Important Instructions
