įĂĀĂĀƫ5!.ƫ+3!.ƫ5/0!)/ƫĨĩČƫ *ċƫ((ƫ.%#$0/ƫ.!/!.2! ċƫ((ƫ+0$!.ƫ0. !).'/ƫ.!ƫ0$!ƫ,.+,!.05ƫ+"ƫ0$!%.ƫ.!/,!0%2!ƫ+3*!./ċƫ
8
INSTALLING YOUR UPS SYSTEM CONT.
HARDWARE INSTALLATION GUIDE CONT.
7. To maintain an optimal battery charge, leave the UPS connected to AC electrical service at all times.
8. Before storing the UPS for an extended period of time, turn the unit OFF. Then cover it and store it with
the batteries fully charged. Recharge the batteries every three months to ensure good battery capacity
and long battery life. Maintaining a good battery charge will help prevent possible damage to the unit
from battery leakage.
9. The UPS has one USB port (default) and one serial port that allows connection and communication
between the UPS and any attached computer running PowerPanel® Business Edition Agent software.
The UPS can control the computer’s shutdown during a power outage through the connection while
the computer can monitor the UPS and alter various programmable parameters. Note: Only one
communication port can be used at a time. The port not in use will automatically become disabled or
the serial port will be disabled if both ports are attached.
10. EPO (Emergency Power Off) Port: EPO ports allow administrators the capability to connect the UPS
unit to customer-supplied EPO switches. These installations give operators a single access point to
immediately power-off all equipment connected to the UPS during an emergency.
11. To avoid electric shock, turn the unit OFF and disconnect the unit from utility power before hardwiring
the UPS (in/out power cord). The in/out power cord MUST be grounded.
12. Please note the internal UPS temperature will increase when fans are not in operation or ventilation is
obstructed. When the high temperature sensor activates protection, the UPS generates an alarm and
shuts down to avoid unexpected equipment damage. When the over temperature occurs, please check
the Troubleshooting section. If the condition persists, please contact CyberPower
for technical support.
