Figure 25: Connect Cable to Antenna
Step 2. Sealing the Connector Assembly
1.
Tightly wrap the connectors with one layer of electrical tape and extend 0.5 inch
beyond the N-type Male connector. This step is highly recommended, as it will make
removal of the weather proofing much faster, easier and less messy.
2.
Tightly wrap the connectors with two layers of vapor wrap. Note: The vapor wrap
should seal entire connection and extend 1.5 inches beyond N-type Male connector
(1inch beyond electrical tape). It is important to cover all of the underlying electrical tape
or water could creep in underneath the vapor wrap.
Vapor Wrap
Figure 26: Sealing the Connector Assembly
Trailblazer Installation and User Manual
30
