Figure 20: Pole Mounting the Trailblazer Enclosure
Pole Mounting Instructions:
•
Attach the mounting flanges to the enclosure using the ¼ -20 x 1” bolts,
¼” flat washers, ¼” lock washers and ¼” hex nuts.
•
Tighten the ¼” nuts to maximum of 25 in-lbs (2.1 ft-lbs).
Do not over
tighten!
•
Position the enclosure on the pole.
•
Place the U-bolts around the pole, and slide the pipe flanges over them
with the serrated sides facing the pole. See figure 19 above.
•
Apply an anti-seizing compound to the threads of the U-bolts.
•
Slide the mounting flanges (now attached to the enclosure) over the U-
bolts and secure using the 5/16” lock washers and 5/16” hex nuts.
•
Tighten
the
5/16”nuts.
Do not over tighten!
Trailblazer Installation and User Manual
22
