Figure 4: Rack Mount Battery Connection
If you are not using the Carlson Wireless power supply, make sure that you power the
unit with 12 – 24VDC with a power supply rating of at least 10 Watts.
2.3.3 Connecting POTS Lines
Connect POTS lines as shown in the figure below using the black screw terminals on the
units’ interface card. Remember to connect the telephone line(s) from the phone
company to the Base unit and the telephones to the CPE unit. The location of your
active lines will depend on the time slots selection made by the CPE and the bandwidth
Trailblazer Installation and User Manual
11
