Repeater
A digital repeater is available to extend the range of the network or to work around
terrain obstacles.
Expandable
Starting with only one link, you can add CPE units, gaining the features of a point-to-
multipoint topology for your current and future growth needs without loosing any of your
original investment.
10BaseT
On-Board
Ethernet Port
On-board Ethernet satisfies simultaneous LAN / IP data and PCM voice needs with an
Industry Standard RJ45 10BaseT connection. Some of its advanced features include
802.3 Ethernet supported by Transparent LAN bridging and Automatic LAN MAC
address filtering at the MAC level, making it transparent to higher level protocols such as
TCP/IP, DECnet, NETBIOS, and IPX network protocols. Broadcast, multicast, or frames
set up for peered LAN are forwarded while reserving maximum RF bandwidth.
1.2.2 General Specifications
Note:
More technical details are found in the Appendix to this manual
Product Description
Digital Microwave Radio with POTS, Leased
Lines
and
10BaseT
/
V.35
port
Data Interfaces
Primary Serial Data Port
(1) RJ45 port providing 10BaseT
Data Rate and Type
128/256/384/512 kbps, synchronous
Serial Command Port
RS 232, 57.6 kbps, N, 8, 1, no handshaking
Latency
< 4.4ms depending on speed selected
Power Requirements
Input Voltage
12 to 24 VDC or 100-260 VAC with AC power
supply (optional)
Power Consumption
3 - 5 Watts depending on configuration
Battery Backup (optional)
Over 8 hours with a 5Ah battery
RF Specifications
RF Frequency Range
2.400 to 2.4835 GHz
4.900
to
5.900
GHz
Modulation Type
BPSK (256kbps) or QPSK (512kbps) DSSS
Transmitter Output Power
+20dBm
Receiver Sensitivity (10
-6
BER)
-93dBm @ 256 kbps, -90dBm @ 512 kbps
Operating Temp
-30 to +60 Degrees C with solar shielding,
0-90% Non-Condensing
Trailblazer Installation and User Manual
4
