4.3 18dBi 2.4 GHz Directional Flat Panel Antenna
This section is designed to support the installation, operation and maintenance of the
18dBi directional flat panel antenna. CWT recommends this antenna because of its
small size, ease of mounting and low maintenance. To avoid harm to persons or
damage to the product please ensure that you have read the safety, unpacking and
installation sections before proceeding.
4.3.1
4.3.2
4.3.3
Product Overview
Refer to the “Product Specifications” Section for exact specifications and characteristics.
Key Features and Benefits:
•
Small
size
•
Patented printed circuit board design with best performance-to-price ratio
•
Attractive, low profile UV stable housing that requires minimal maintanace
and blends well with indoor and outdoor environments where aesthetic
considerations are important
•
Corner exit RG-58/U pig-tail design permits the panel to be mounted in
vertical or horizontal polarity
•
Adjustable, heavy-duty mounting brackets provide maximum flexibility,
stability even in high wind conditions and easy mounting
Unpacking
The 18dBi directional flat panel may be packaged and shipped with other items included.
Thoroughly inspect the package and the antenna for damage and immediately report
any damage to the shipper.
Mounting
The MPAB8 tilt mounting bracket, included with the antenna, is used to provide down or
up-tilt mounting to a mast up to 2.88 inch O.D. (2.5inch schedule 40 pipe).
Recommended tools for installation:
•
(1) 7/16” wrench or #2 Philips screw driver
•
(1) 9/16” open end wrench
•
Vapor wrap and electrical tape for weatherproofing. See section 4.5
•
Cable
ties
This is a properly mounted panel antenna. Note
the ability of the mount the aim the antenna up
tilt or down tilt.
Figure 21: MPAB8 Tilt Mounting Bracket
Trailblazer Installation and User Manual
25
