background image

7. Time Setting

Step 1:   
power on, in the standby status, press and hold 

(mandatory flushing button), then press 

(power 

button), 2 seconds later 

(time code) lights up. 

Step 2:   
release 

(power button) and 

(mandatory flushing button), 

(time code) flashing, press 

(power 

button) can modify the flashing digital. 
Step 3:   
after setting finished, press 

(mandatory flushing button) can switch the flashing digital. 

Time modification: 
The  time  of  water  producing,  water  storing, 
back  washing,  forward  washing  can  be 
modified.   

Time  modification  is  divided  into  five  stages: 
water  producing  1,  water  producing  2, 
flushing 1, flushing 2, flushing 3.   

The  corresponding  time:  water  producing 
time  (0~99hour),  water  producing  time 
(0~59min),  water  storing  time  (0~99sec), 
back  washing  time  (0~99sec),  forward 
washing time (0~99sec).   

The corresponding status shown on the panel: 
“filtration  indication  +  number  1”  lights  up, 
“filtration  indication  +  number  2”  lights  up, 
“flushing  indication  +  number  1”  lights  up, 
“flushing  indication  +  number  2”  lights  up, 
“flushing indi number 3” lights up.     

Summary of Contents for 82C








Reviews: