Installation Instructions
Original Instructions
Kinetix 5100 AC Line Filter
Catalog Numbers 2198-DB111-F, 2198-DB127-F, 2198-DB310-F, 2198-DB324-F,
2198-DB335-F, 2198-DB356-F
This publication provides installation instructions for the AC line filters used with Kinetix® 5100
servo drives. Use these instructions for installing and wiring your AC line filter. For more
information on installing and wiring your AC line filter, see Kinetix 5100 Single-axis
EtherNet/IP™ Servo Drives Users Manual, publication
Before You Begin
For general guidelines when laying out your panel and mounting your AC line filter, refer to the
System Design for Control of Electrical Noise Reference Manual, publication
.
For guidelines specific to your application, refer to the Kinetix 5100 Single-axis EtherNet/IP
Servo Drives Users Manual, publication
Topic Page
ATTENTION:
To avoid personal injury or damage to equipment due to hazardous voltages, follow
these guidelines when installing your AC line filter. NEC and local regulations always take
precedence.
•
Disconnect mains power before installation.
•
Verify that the rated voltage is compatible with the local supply voltage.
•
Connect the earth ground connection first when you make connections.
