Cutera Excel V+, Operator'S Manual, Page: 72 / 112

64
EXCEL V+ OPERATOR MANUAL
D2325, REV A, 2/19
Inspecting and Cleaning the Heat Exchanger Intake
The heat exchanger intake, located on the bottom of the system console, should be kept free of dust and
lint accumulation. If the heat exchanger intake becomes clogged, the system will overheat prematurely,
resulting in a temperature-related error code.
Inspect and clean the heat exchanger regularly using a hand mirror and long-handled bath brush as
described below.
1. Using a hand mirror, inspect the bottom of the system console for dust or lint
accumulation.
2. Clean the heat exchanger intake by inserting a long-handled bath brush under either side
of the system console, then pulling the brush toward your body to remove any dust or lint.
3. Repeat on the opposite side of the console to ensure that the entire heat exchanger intake
is clean.