Custom Audio Electronics PRT 80, User Manual

Page: 53 / 96

3. PRINTER FUNCTIONS
PRT 80 35 3-
[Notes] • Ignored unless the next horizontal tab position has been set.
• If the command is received when the printing position is at the right margin, the printer
executes print buffer full printing and horizontal tab processing from the beginning of the
next line.
• Horizontal tab positions are set using
$1B $44.
[Default]
[Reference]
$1B $44
[Example]
A 0 $
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the buffer and feeds one line based on the current line spacing.
[Notes] • Sets the print position to the beginning of the line.
[Default]
[Reference]
$1B $32, $1B $33
[Example]
D 0 $
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Description] When autofeed is “CR enabled”, this command functions in the same way as $0A ,
otherwise it is disregarded.
[Notes] • This command sets the print position to the beginning of the line.
[Default]
[Reference]
$0A
[Example]
n 4 0 $ 0 1 $
[Name] Real-time status transmission
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 1
≤
n
≤
4, n=20
[Description] Transmits the selected printer status specified by n in real time according to the
following parameters:
n = 1
transmit printer status
n = 2 transmit off-line status
n = 3 transmit error status
n = 4 transmit paper roll sensor status
n = 20 transmit FULL STATUS
[Notes] • This command is executed when the data buffer is full.
• This status is transmitted whenever data sequence $10 $04 n is received (1
≤
n
≤
4).