Custom Audio Electronics PRT 80, User Manual

Page: 79 / 96

3. PRINTER FUNCTIONS
PRT 80 61 3-
H n L n W S G
[Name] Set printing area width
[Format] ASCII GS W nL nH
Hex 1D 57 nL nH
Decimal 29 87 nL nH
[Range] 0
≤
nL, nH
≤
255
0
≤
(nL + nH
×
256)
≤
832
[Description] Sets the printing area width to the area specified by nL and nH .
• The printing area width is set to [(nL + nH
×
256)
×
(horizontal motion unit)] inches.
Printable area
Left margin Printing area width
[Notes] • This command is only enabled if set at the beginning of the line.
• If the right margin is greater than the printable area, the printing area width is set at
maximum value.
• If the printing area width = 0, it is set at the maximum value.
• The horizontal and vertical motion units are specified by
$1D $50 . Changing the hori-
zontal or vertical motion unit does not affect the current left margin.
• The
$1D $50 command can change the horizontal (and vertical) motion unit.
• However, the value cannot be less than the minimum horizontal movement amount and
it must be in even units of the minimum horizontal movement amount.
[Default]
:. l o c 6 5 d n a 2 3 fI 0 = H n = L n
: .l o c 2 4 fI 0 = H n 4 1 = L n
[Reference]
[Example]
m t r E 5 $ D 1 $
[Name] Execute macro
[Format] ASCII GS ^ r t m
Hex1D 5E r t m
Decimal 29 94 r t m
[Range] 0
≤
r, t
≤
255
0
≤
m
≤
1
[Description] Executes a macro.
•
r specifies the number of times to execute the macro.
• t specifies the waiting time for executing the macro.
The waiting time is t
×
100 msec. for each macro execution.
• m specifies macro executing mode:
When the LSB of m = 0, the macro is executed r times continuously at the interval
specified by t .
When the LSB of m = 1, after waiting for the period specified by t , the LED indicator