manualshive.com logo in svg

Curtiss-Wright DTI-VME/S, User Manual

Share
Download
Curtiss-Wright DTI-VME/S User Manual Download Page 26

GETTING STARTED 

11.  The DTI-VME/S asserts a high priority interrupt indicating the end of the Command               

Block Buslist.  The DTI-VME/S also asserts a standard interrupt due to the command 
block bit being enabled in the Standard Interrupt Enable Register and logs the event in 
the interrupt queue. 

 

2.7.2  RT Operational Sequence with Interrupts 

The DTI-VME/S receives a command to receive 32 data words to Subaddress 2 (BC-to-
RT). 

 

1.  The RT response block for Subaddress 2 is set up with an index of 1 in the preferred 

area of memory.  The onboard RAM address of the RT response block for the receive 
subaddress is stored in Register 02. 

 

2.  The data list pointer of the RT response block is set up to store all data words in 

memory beginning at the indicated address.  It is updated at the end of each successful 
message with the starting address of the next message when the index field <> 0. 

 

3.  The message status pointer is set up to store all message status list information in 

memory.  It is incremented by 1 with each successful message transfer except when 
the index field equals 0. 

 

4.  Configure the standard interrupt queue in the preferred area of memory and initialize 

Register 06 with the onboard RAM address of the beginning of the queue. 

 

5.  Select the desired RT in Register 10. 

 

6.  Enable the Standard Interrupt Bit in the high priority interrupt enable register and the 

interrupt when index = 0 bit in the control word. 

 

7.  Enable the desired bus and set the Start Enable Bit in Register 00. 
 

8.  The DTI-VME/S receives the incoming data words and stores them in memory as pointed 

to by the data list pointer.  All incoming data is checked for validity. 

 
9.  The DTI-VME/S checks the status of the input bits from the RT Address Register 

(Register 10) and inputs them into the 1553 status word.  The DTI-VME/S then transmits 
the status word. 

 

10.  A message status word is then written to memory as pointed to by the message status 

pointer and the pointer is incremented by 1 (since the index <> 0). 

 
11.  The data list pointer is incremented by 32 and the index field of the control word is 

decremented to 0. 

 
12.  The DTI-VME/S asserts a standard interrupt because the index equals 0.  The interrupt 

queue entry indicates a subaddress event interrupt occurred and the interrupt queue pointer 
contains the address of the corresponding Subaddress 2 RT response block. 

 

 

Copyright 2004 

2-12 

DTI-VME/S 

 

Summary of Contents for DTI-VME/S

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands