![background image](http://html1.mh-extra.com/html/curtis/1fisx33pr/1fisx33pr_installation-and-owners-manual_2699820011.webp)
CAB INSTALLATION
11 of 23
Step 8: (A/C Cover Panels)
8.1
See fig. 8.1. Install the Compressor Debris Cover
onto the A/C compressor mount as shown.
Tools Required
3/8”
hex wrench or socket
Hardware Used
Qty
1/4
-
20 x
5/8”
Flanged Hex Bolt
4
8.2
Per fig. 8.2, secure the upper hose to the lower
tab on the left ROPS mount with a
3/4”
P
-
clamp,
1/4”
x
1”
bolt and nut. Secure each hose to the
upper tab of the compressor debris cover with a P
-
clamp, bolt, and nut. Arrange the clamps and
hoses so that the hoses will clear the cover then
tighten snug.
Tools Required
3/8”
and
7/16”
hex wrenches or sockets
Hardware Used
Qty
3/4”
P
-
clamp
3
1/4
-
20 x
3/4”
Flanged Hex Bolt
2
1/4
-
20 Flanged Lock Nut
2
8.3
See fig. 8.3. Make sure all wires and hoses are
secured, and nothing will contact any moving
parts, then place the flywheel shroud on top of the
A/C compressor assembly. Secure with
1/4”
x
5/8”
lg. screws and tighten snug,
Tools Required
3/8”
hex wrench or socket
Hardware Used
Qty
1/4
-
20 x
5/8”
Flanged Hex Bolt
12
Fig. 8.2 (A/C hose P
-
clamps)
Fig. 8.1 (Compressor Debris Cover)
1/4
-
20 bolts
1/4
-
20 bolts
P
-
Clamp
P
-
Clamps
Fig. 8.3 (Flywheel shroud)