13
SAFETY PRECAUTIONS
WARNING
READ AND UNDERSTAND THESE SAFETY PRECAUTIONS
BEFORE OPERATING MACHINE
1. ENGINE AND FUEL;
This machine uses gasoline as the fuel for the internal
combustion engine and all precautions commonly applying to this volatile fuel
should be observed. Exercise extreme caution to avoid spilling of gasoline. If
spillage occurs, wipe it off and allow evaporation time before starting the engine.
DO NOT attempt to put fuel in tank while the machine is still running. Avoid
smoking or open flames in area when handling gasoline. Never run the unit
indoors unless exhaust is vented to outside. These fumes contain carbon
monoxide which is colorless and odorless and can be fatal.
CAUTION
DO NOT OPERATE ENGINE WITHOUT MUFFLER.
NOTE: The engine is equipped with a muffler that has a U.S. Forestry Service
approved spark arrester which is required by law in some states.
DO NOT TOUCH HOT MUFFLER, CYLINDERS OR FINS AS CONTACT MAY CAUSE
BURNS.
EXCEPT FOR ADJUSTMENT, DO NOT OPERATE THE ENGINE IF AIR CLEANER
OR COVER DIRECTLY OVER THE CARBURETOR AIR INTAKE IS REMOVED.
DO NOT RUN THE UNIT IF THE COUPLING GUARD IS REMOVED.
DO NOT TAMPER WITH GOVERNOR SPRINGS, GOVERNOR LINKS OR OTHER
PARTS WHICH MAY INCREASE OR DECREASE THE GOVERNED ENGINE SPEED.
2. MACHINE DAMAGE
: Never operate a machine after it has been damaged.
A damaged machine can be very hazardous.
3.
WIND:
Spraying during windy conditions is not usually practical because the
formulation will drift out of the intended area. However, under
NO
circumstances should spraying into the wind be attempted. This may cause
hazardous accumulations on the machine or carrying vehicle.
4. SAFETY EQUIPMENT:
In addition to any safety equipment that may be
required by the type of formulation which is being used, the following items
should be mandatory for each vehicle which carries this machine during fogging
operations.
Summary of Contents for MAXI-PRO 2D ULV
