Curtis Dyna-Fog MAXI-PRO 2D ULV, Instruction Manual For Operation And Maintenance

Page: 33 / 52

33
3- WAY SOLENOID VALVE ASSEMBLY
(INSTRUCTIONS FOR REBUILDING AND CLEANING)
1. Using a screwdriver, snap off the retaining clip which secures the coil assembly.
2. Remove the retaining clip, the nameplate spacer and the coil housing.
3. Slide the coil off the valve body, and using a spanner nut (P/N 62650-15),
remove the core housing for cleaning or rebuilding.
4. Clean all parts thoroughly, using a cleaning solvent.
5. When reassembling the valve, be sure that the body seal ("O" ring) is in place.
6. Tighten gently.
7. Re-assemble coil assembly, nameplate spacer, and retainer clip.
* Indicates parts supplied in rebuild kit (P/N 62650-14).
NOTE: A spanner nut P/N 62650-15 will be needed for disassembling core
housing from body.